Ghost Car Immobiliser

Ghost is a cutting-edge anti-theft device that prevents your car from starting without entering the sequence pin. It is invisible and uses the CAN data networks.

It is possible to set it up to use a unique pin code that is entered by pressing buttons on the steering wheels, doors or consoles. This makes it highly effective against modern methods of theft, such as key replication and relay vehicle hacking.

Easy to install

The Ghost immobiliser is an advanced security device that is designed to safeguard your car against key cloning, hacking, and even key theft. It is discreet, unnoticeable to thieves, and TASSA-verified (a third party group of security and police experts). This makes it one of the most reliable devices on the market.

The ghost system is connected to the CAN bus of your vehicle. It is an electronic control units (ECUs), which controls the engine, transmission and brakes. The system then stops the vehicle from starting unless the unique PIN code sequence is entered. The PIN code is entered through buttons on the steering wheel, centre console, or door panels. The sequence could be as long as 20 presses, making it difficult for thieves to guess a correct code.

Unfortunately, a few determined criminals are finding ways to bypass these advanced security systems. One method to do this is by blocking or spoofing signals between the ECU and Ghost Immobiliser. Another method is by locating and connecting to the CAN bus and sending malicious commands to the vehicle's ECU. This can cause the ECU to shut down the vehicle or make it inoperable. However, you can assist to ensure the safety of your vehicle by installing a range of additional security measures, such as an alarm system and GPS tracker.

Ghost immobilisers are an ideal complement to other security measures. It is easy and quickly installed without the requirement for additional hardware or visible components which would alert potential thieves of its presence. The device can be hidden under your dashboard or behind the steering wheels which makes it difficult for thieves to steal it. It's quiet and cannot be detected by radio frequencies.

However, you must install your ghost immobiliser by using an Thatcham or Autowatch approved installer. They are experts who know their cars inside out. They will know where to hide the device to ensure that it is not visible to eyes. It is also recommended that you make use of a tracker approved by Thatcham and dash cam together with your ghost immobiliser to offer the best possible protection for your prized possessions.

There aren't any keyfobs, LEDs or other indicators to help you locate it.

It's becoming increasingly difficult to protect your prized items from theft by vehicle. Thankfully, the creators of Ghost Immobiliser have stayed one step ahead, developing technology that is completely unnoticeable to thieves. This cutting-edge anti-theft device has been designed to protect your car from key cloning, hacking and even theft. It communicates with the ECU via CAN data circuits, and is totally undetectable by any RF scanning technology or code capture.

The device is totally undetectable by car thieves because it doesn't have radio signals or LED indicators. It uses buttons in your car like the dashboard or steering wheel to generate a unique code that must be entered to start the vehicle. This can be changed at anytime, giving you complete control over your security. Furthermore it won't allow a thief to add new key fobs or to replace the ECU, preventing them from taking off with your car.

Another way the device can stop theft is by detecting signals relay attacks. The device can detect signal relay attacks, where thieves amplify the signal from your current key fob in order to get around an immobiliser. However, the Ghost system can detect this and disable the key fob to prevent thieves from starting your car.

You can also utilize the Ghost app on your smartphone to access a service mode which allows you to start your car without your pin. This feature is ideal when you need to take your vehicle to a garage for maintenance or valet parking. The app will also notify you when the car has been moved away from its original position.

As you can see, there are a myriad of reasons to invest in an immobiliser that is ghostly. https://courtfire40.werite.net/10-things-that-everyone-is-misinformed-concerning-ghost-immobiliser-installation is simple to use, discrete and protects you from many dangers. It is TASSA verified which means that it has passed rigorous tests conducted by an independent organization. If https://periodcork91.edublogs.org/2024/11/08/10-top-mobile-apps-for-ghost-immobiliser-car/ about installing a ghost immobiliser, ensure you choose an approved supplier that is TASSA verified. This means that the installer is properly trained and certified, and will work with the car's interface to provide the best security.

No permanent damage to your vehicle

The Ghost immobiliser is completely hidden behind the dashboard and beneath the steering wheel, meaning thieves are unable to see it, or even see it. This is a major benefit over traditional immobilisers which can be easily bypassed using signal cloning or jamming devices. This is particularly beneficial for owners of luxury vehicles who want to maintain their car's aesthetics and performance, while also providing a higher level of security.

In addition, the Ghost CAN Bus immobiliser uses buttons on the vehicle's steering wheel and centre console, as well as the door panels to generate an individual pin code that must be entered prior to driving your vehicle. The pin code functions like a credit card, and you can configure it to be up to 20 characters in length. This makes it even harder for thieves to copy or hack the system and ensures that only you are able to access your vehicle.

It is important to hire a professional installer when installing the ghost immobiliser. This will ensure that the device is installed correctly and won't cause any damage to your vehicle. A professional can also help identify any issues with your vehicle, and offer guidance on how to solve them.

Before beginning the installation, it is recommended that the battery be removed. This will help prevent electrical issues or accidental airbag deployment. It is also essential to label the CAN H and L wires, as misidentifying these can lead to incorrect installation or system malfunctions. After identifying the power source and grounding point, insulate these connections using insulation tape or heat-shrink tubing to prevent short circuits. It is also an excellent idea to test the immobiliser following installation to make sure it functions as intended.



The Ghost Immobiliser can be a powerful tool for preventing vehicle theft. However, it's not completely secure. Thieves are constantly devising new ways to get around security systems, which is why it is essential to combine it with other advanced security measures and remain vigilant. These tips will help you minimize the risk of your vehicle is stolen and give you peace of mind, regardless of where you park your vehicle.

TASSA verified

In recent years, car owners have taken additional security measures to safeguard their vehicles. One of these security measures is to install an immobiliser ghost that is designed to prevent vehicles from being stolen using key-cloning or hacking. However, determined thieves are always looking for ways to circumvent these security devices.

To counter this, a new generation immobilisers has been created by companies like Autowatch. These new devices are TASSA certified, which means that they have been independently tested by 3rd party experts to ensure that the device is incredibly reliable. This proves that the device will stop even the most skilled thieves.

The device itself is discreet and undetectable to thieves and connects directly to the buttons on your vehicle. This allows you to set a unique PIN code sequence which has to be entered by pressing the buttons on your steering wheel or centre console in order to start or drive the vehicle. The system is also quiet and only operates only if the correct code has been entered. The device emits no radio frequencies, and therefore is not able to be detected using conventional detection methods, such as scanners or radar guns.

In addition in addition, Ghost II is also a Thatcham approved device. Ghost II is a Thatcham approved device which means that it will be recognized by insurance companies as a further security measure and could lower your insurance premium based on the conditions of the insurer. This makes it the most reliable and efficient immobiliser available.

This will also ensure that the company you choose to install the device is fully qualified. You can then rest that you're getting quality installation and the best service. This is especially important as you'll want the ghost to be recognised by your insurer because it could prove helpful in the event that your vehicle is stolen.