What to Do When Your Car Keys Are Damaged

Car keys get lots of use, and it's not uncommon for them to get damaged or even lost. Auto locksmiths can often solve these problems.

Key fobs are often jostled around, so changing buttons can help them function properly again. If replacing the battery doesn't assist, the key fob might require replacement entirely.

Dead Key Fob Batteries

Even though the days of the old jingling keys to cars are long gone, the fact is that a lot of cars still have fobs for keys. They can be very useful, but should their batteries go out they could cause problems. That's why they need to be charged at all times. This is a daunting task and a dead battery on your key fob could leave you in a bind.

There are ways to get out of this situation. Based on the make and model, there is often a mechanical key in the fob that you can use to open the door. Some models have a backup key that can be used to start the car. This is a last resort that's typically only used to get you to your destination, but it can be used in certain situations.

If https://winther-manning.hubstack.net/10-steps-to-begin-the-business-you-want-to-start-key-fob-repairs-business are unable to start your car with this method, then the next best option is to lift the front of your vehicle off the ground using set jumper cables. Hook the red cable to the big terminal of the starter and the black cable to the ground nearby. This will give the fob battery enough power to start your vehicle or at the very least get you to home or an expert mechanic.

You can also take the key fob into an Interstate All Battery Center to get a new battery. To replace the battery, you'll require a small flathead screwscrewdriver or butter knivescrew as well as other pry tools. Be careful not to apply too much pressure on the case, or it could explode and scatter fob pieces all over your living room.

After opening the case, use the pry tool to get around the fasteners in the same way you would with an apple or orange and begin separating the two halves. Be careful not to pull on the antennas or circuit boards, which contain the electricity that keeps the key fob plugged in to your car. If you disturb these then you must go to your dealer or an auto repair shop to have it re-programmed.

Locked Keys in the Trunk

Sometimes, it's simple to lock your keys inside your trunk, particularly if you're in a hurry or distracted. Fortunately, many people keep spare car keys somewhere inside their wallets or at home, so this isn't always a problem. In this instance, you can call a locksmith or a roadside assistance service to rescue your keys. They will be able to unlock the trunk without harming your car and may be able to repair any damaged locks that caused this incident.

You can also contact the dealership to request them to create a key for you. Of course, a better option is to keep a spare key in your wallet or home to keep it handy in the event that you lock your keys inside the trunk again.

If you don't have an alternative trunk, you can still open the trunk by overriding the locking mechanism. This involves shorting a fuse that powers trunk release. It's important to adhere to safety guidelines as this process isn't easy. Check the owner's manual for directions on how to do this. This method is not recommended for those who do not have a lot of automobile experience.

If standard locksmith techniques aren't working, you can make use of household tools like the screwdriver or rod made of metal. A spatula, or any other kitchen tools can be used to force the trunk open or make space. Unfortunately, some vehicles have advanced security features that prevent these methods from working, so a specialist will likely be required to open your trunk. The experts can also carry out a jiggle or rekeying procedure to bypass the locking mechanism, or they might have to cut the actuator for the trunk lock and make a hole in the door. These techniques are expensive and should be kept as an emergency key in your possession or ask your dealer for the possibility of Rekeying. This will hopefully help you to avoid any future issues.

Damaged Ignition

Turning the key in your car could seem like a straightforward task, but it actually involves numerous steps and a variety of parts that have to cooperate for the vehicle to start. If one part is damaged, or one step isn't executed properly, it could cause you to lose power or control when you're driving along the road. Being aware of the signs that indicate your ignition is not working properly will help you avoid more serious problems, and help you find the best solutions.

A mobile mechanic will check your ignition system for damage if it is becoming difficult to turn. They can remove the cylinder of ignition by using automotive lock picks in order to repair any damage that could have caused the problem. They can also fix this issue by programming the key or the ignition on the spot and ensuring that you are able to drive away safely with your vehicle's full functionality intact.

If your car stops while you drive, this could be a sign you need an ignition repair. It can be dangerous for other drivers if your engine shuts down while you're driving. You could also be at risk of causing an accident. Worn ignition switches, ignition cylinders, and other components can create these types of problems So fixing them promptly is crucial.

Sometimes, you might have a little more trouble than just a jammed ignition switch and require an entire replacement instead. In these instances, a mobile mechanic is usually in a position to complete an ignition replacement on the spot. They'll be able to accomplish this by disassembling the steering column and removing the old ignition assembly, then installing the new one, making it easier to insert the key and start your car. This will save you money and time over buying a new car. It is also much quicker than waiting for a store to open at a convenient time.

Damaged Locks

There are a few common reasons that your car lock could be damaged. Certain of these issues can be solved by replacing the key fob battery while others require a more precise repair to repair the mechanical component or electronic locking system.

Weather Damage



Extreme temperatures, sunlight exposure and dust can all be major problems for locks. These environmental conditions can cause wear, corrosion, and discoloration over time. This can eventually lead to the lock becoming functionally ineffective. Regular inspections are essential to prevent this.

If you're having trouble making the key turn in your door lock, it could indicate that the mechanism has become jammed. It is most likely due to dirt and grime accumulation and can be resolved by a couple of simple DIY methods such as using an q-tip that is damp or a cotton swab. Spray the lock with graphite or silicone spray.

The pins inside the cylinder might be misaligned. The issue can be rectified by removing the lock and re-aligning the cylinder manually with the keyhole on the door. After the cylinder has been repositioned it must be secured with the correct screws.

The key itself can be damaged in some way. This can be caused by excessive force when turning the key or the key was cut incorrectly. If you suspect this is the issue then try a different key and check if there are no problems. The best method to fix any damage is to consult a professional locksmith. They will conduct a thorough diagnosis to determine the root cause of the issue. They will then use special tools to remove any debris from the lock mechanism. They will then replace the broken parts with new ones to restore full functionality. A locksmith can also provide suggestions on how to safeguard your lock from further damage. This can include weatherproof covers or shields that help protect the lock from harsh elements.