How to Install a Ghost Immobiliser

Ghost immobilisers are hidden security system that shields your vehicle from hacking and key cloning. It works by stopping the engine from starting until a PIN code is entered. This could be as long as 20 characters.

This extra layer of protection isn't visible to thieves who may not be aware of it. Certain systems have an app that allows the owner to disarm their immobiliser in the event of forgetting their PIN number or use service/valet mode.

Connecting to the vehicle's CAN bus

The Ghost 2 Immobiliser is an innovative security system that can be incorporated into your vehicle's ECU, providing a discreet security line against thieves. It is highly effective and user-friendly and is a great component of your vehicle's security arsenal. However, just like any other anti-theft system, it is not 100% reliable and requires regular maintenance to ensure proper operation. Fortunately, this guide can help you get the most benefit from your Ghost 2 Immobiliser.

CAN (Controller Area Network) is a robust serial network that lets microcontrollers communicate with one another in short distances, without the need for central control units. It is designed to multiplex electrical wiring in vehicles, thereby saving on copper. It has numerous advantages, such as low cost and easy use.

The CAN protocol is utilized in a majority of modern vehicles to communicate with the engine management system, transmission controller, steering control module and air conditioning controls and many more. It also transmits sensor data, such as speed sensors and other inputs, to control the car's various features. The CAN bus is used to monitor these diverse components, and can prevent a vehicle from starting if they are in an unsafe state.

It's crucial to understand how the CAN bus operates and how it's secured. Using CAN bus could be an excellent method to enhance the features of your vehicle, but it's essential to secure it from threats like hackers and other hacker. Installing a firewall, and monitoring your CAN bus with software is the best method to accomplish this.

Ghost2's discreet control unit is hidden away in the wiring harness or dashboard, eliminating the possibility of a criminal physically tampering with it. It is also impossible to reset a PIN or emergency code without having access to the car.

If you need to give your car away for servicing, valet parking, or any other reason, you can activate the Transport Mode. This feature will disable both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only be activated when the vehicle has reached 31 mph for a time of 15 minutes.

The process of creating an PIN code

The Ghost immobiliser is a powerful security device that shields your vehicle from thieves. The innovative technology uses the PIN to disable the engine of the vehicle and stop it starting without the correct code, or an authorized fob or mobile. The system's subtle design makes it unnoticeable, and offers unrivaled security against theft. The system is TASSA certified and can save you significant sums on your car insurance.

During installation during installation, the Ghost system goes into the learning mode to record the sequence of buttons that are pressed to create your unique pin code. The installer will guide you through activating the system after the pin code is created. Once activated, the Ghost system will turn off your vehicle's starter motor until a valid PIN has been entered or the vehicle is switched to transport mode. This makes it very difficult for thieves or cloners to hack or duplicate the starter system of your vehicle.

It is easy to install a Ghost immobiliser, but you must follow the detailed instructions included in the user guide to ensure proper performance. Basic hand tools will assist in making precise connections and a multimeter can assist in determining electrical values. Insulation tape and heat shrink tubing can protect exposed wiring and cable tie is essential to keep everything tidy and secure. Also, be certain to test the system frequently to spot any issues or potential errors.

It is important to check the system one final time prior to turning on the ignition. Ghost immobilisers will arm themselves after 3 to 30 second depending on the model of your car. The system is also equipped with a Service/Valet Mode which allows you to temporarily disable the system for servicing or valet parking.



The immobiliser can be hidden under the dashboard or on the steering wheel. It is recommended to use a small bit of paint or duct tape to mark the CAN H and CAN L wires to ensure that you easily find them when you are testing. In addition the CAN H and L wires should be connected to a source of power that is able to provide continuous 12V. It is essential to test the connections again after testing as incorrect identification of these wires could cause the system malfunction.

The system must be activated

A ghost immobiliser blocks your car from starting unless you press a sequence of buttons inside the vehicle, usually the steering wheel, door panel, or central console. The sequence is set by the user and can be altered if necessary. Once the system is activated it cannot be deactivated by thieves which makes it a great option for anyone who wishes to safeguard their vehicle from theft.

The system is designed to be undetectable. This means it isn't detected by modern diagnostics or code-grabbing technology. It does not emit radio frequencies either making it even harder for thieves to detect.

If the device is located it will stop the engine from running. It will also sound an alarm to scare thieves away. The device can be used to monitor a car's location which can assist in the recovery of the vehicle if it has been stolen.

Contact Car Specalist Customs for a estimate or to discuss your options in a Ghost immobiliser. We are certified to install ghost immobilisers in your vehicle. We will make sure that it is concealed in a location that is difficult to access. We also offer other security measures like a wheel lock and kill switch to keep your car safe from thieves.

Disarming the system

If you have an Ghost immobiliser installed to your vehicle, it's essential to know how to disable it. It can be used in the event you forget your keys or your battery fails. The system utilizes a unique PIN code, which only you are aware of. It will not start the vehicle without this code. The simplest method to enter the code is to press a series of buttons on your dashboard or steering wheel. https://rockpig96.bravejournal.net/this-story-behind-ghost-install-can-haunt-you-forever is much simpler than using a key fob. It also prevents others from copying the remote.

Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and is compatible with your vehicle's bus network to operate. Its standout feature is its ability bypass the engine without impacting your vehicle's normal functions, making it impossible for thieves to make use of signal boosters or duplicate your car key. It doesn't emit radio frequencies, which means thieves won't be able to detect it.

The Ghost system also comes with a Transport Mode which allows you to temporarily disable the security system for occasions like transportation or servicing. https://sandovalsellers.livejournal.com/profile is a great option when you need to lend your vehicle to someone without sharing the PIN code, or when you want to secure your vehicle while driving it. Press the service button five times in 2 seconds to activate the Transport Mode. The Ghost system will confirm activation with 5 signal signals.

Save the emergency code outside your vehicle in a safe place. If you ever find yourself locked out of your vehicle, you can call the company or technician who installed the system and they will give you the code. If you're unable to contact them, you can contact an authorized dealer. However, this may involve verification procedures, and you could be charged additional fees.

Apart from the ease of this system, you can also count on it to guard your vehicle from theft and reduce insurance costs. Many insurance companies offer reduced monthly premiums or even financial incentives for installing this anti-theft technology.