aureus, and V. parahaemolyticus were 2.460, 5.407, and 3.770 cfu/mL, respectively. In the tap water simulation, the detection limits of E. coliO157H7, S. aureus, and V. parahaemolyticus were 2.730, 1.990 × 101, and 4.480 cfu/mL, respectively. In the milk simulation sample, the detection limits of E. coliO157H7, S. aureus, and V. parahaemolyticus were 6.660, 1.070 × 101, and 2.236 × 101 cfu/mL, respectively. The method we presented can detect three kinds of foodborne pathogens at the same time, and the entire experimental process did not exceed 4 h. It has high sensitivity and low detection limit and may be used in the sample detection of other pathogens.A novel ionic liquid immobilized on a magnetic polymer microsphere catalyst is reported in this paper. The obtained core-shell-shell catalyst consisted of magnetic nanoparticles (MNPs) as the core, catalytic inert St-co-DVB as the intermediate protective layer, and cross-linked polyaryl imidazole ionic liquids as the active catalytic layer located at the outermost [Im[OH]/MNPs@P(St-DVB)@P(VBC-DVB)]. This catalyst exhibited a high ion-exchange rate (64.65%), high saturation magnetic strength, and excellent acid and alkali corrosion resistance. In the catalyzed Knoevenagel condensation of benzaldehyde and ethyl cyanoacetate, the conversion of benzaldehyde maintained at 92.1% during six times reuse. Optimizing the materials of the protective layer and regulating the thickness of the inert protective layer decreased the corrosion ratio of MNPs in acidic media from 44.82 to 0.44%. Adjusting the thickness of the catalytic layer realized excellent catalytic activity (97%) and high magnetic response performance. In summary, introducing an inert protective layer to the structure of ionic liquids immobilized on the magnetic polymer microsphere catalyst, regulating its thickness, and optimizing its structure achieved a catalyst with high activity, excellent stability, and easy magnetic separation.Bacterial infections are the most common type of clinical infection. The abuse of clinical antibiotics has led to the frequent appearance of drug-resistant strains and even some super bacteria. In this study, we synthesized Poly(MTZ) n -(DMAEMA) m polymer micelles with cations on the surface. The synthesis of this novel polymer comes in two steps. First, Poly(MTZ) n was synthesized with metronidazole (MTZ) referred as the macromolecular chain transfer agent and v-501 as the initiator for initiating the polymerization of 4-cyanopentanoic acid dithiobenzoate. Then, novel polymer micelles were synthesized with Poly(MTZ) n referred as the macromolecular chain transfer agent and v-501 as the initiator for initiating the polymerization of the monomer 2-(dimethylamino) ethyl methacrylate, which could adsorb to the negatively charged bacterial surface via electrostatic interaction and enhance bactericidal activity. Scanning electron microscopy showed that the micelles could be accurately targeted to the surface of bacteria, and the zone of inhibition assay confirmed that the micelles could enhance the sensitivity of bacteria to drugs. Hence, Poly(MTZ) n -(DMAEMA) m polymer micelles will have potential use for the clinical treatment of anaerobic infections in the future.Star-shaped three-dimensional (3D) twisted configured acceptors are a type of nonfullerene acceptors (NFAs) which are getting considerable attention of chemists and physicists on account of their promising photovoltaic properties and manifestly promoted the rapid progress of organic solar cells (OSCs). This report describes the peripheral substitution of the recently reported highly efficient 3D star-shaped acceptor compound, STIC, containing a 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC) end-capped group and a subphthalocyanine (SubPc) core unit. The 3D star-shaped SubPc-based NFA compound STIC is peripherally substituted with well-known end-capped groups, and six new molecules (S1-S6) are quantum chemically designed and explored using density functional theory (DFT) and time-dependent DFT (TDDFT). https://www.selleckchem.com/products/astx660.html of states (DOS) analysis, frontier molecular orbital (FMO) analysis, reorganization energies of electrons and holes, open-circuit voltage, transition density matrix (TDM) surface, photophysical c8.77 nm (in chloroform), and highest Voc = 1.90 V with respect to HOMOPTB7-Th-LUMOacceptor. Our results suggest that the selected molecules are fine acceptor materials and can be used as electron and/or hole transport materials with excellent photovoltaic properties for OSCs.To improve the resistance to CO2 corrosion of oil well cement, soap-free emulsion polymerization was used to prepare a soap-free latex (PSAC) with sodium styrene sulfonate (SSS) and nano-SiO2 (SSS/SiO2) as the ionic copolymer emulsifier. #link# The effects of SSS/SiO2 on the performance, thermal stability, and latex particle morphology of the PSAC were investigated through zeta potential, TGA, and TEM measurements, respectively. The carbonation resistance properties of cement with PSAC were evaluated, and the anticorrosion mechanism of the PSAC cement was determined by SEM, EDS, XRD, and 29Si NMR analyses. The results showed that the PSAC particle size was uniform, the particles were monodispersed, and they had a typical core-shell structure and good heat resistance. The carbonation resistance test results showed that after 60 days of corrosion, the corrosion depth of the cement with 12.0% PSAC content was only 2.16 mm, the permeability was 0.0018 mD, and the decrease in the compressive strength was 6.65%. The porosity in the cement was reduced significantly, and the pore volume (>50 nm) of the cement was reduced by 0.24 times. The PSAC film formation decreased the contact between hydration products and CO2. In addition, the nano-SiO2 in the PSAC reacted with Ca(OH)2 to reduce the free Ca(OH)2 content in the cement and generate C-S-H gel with a low Ca/Si ratio and high polymerization, which did not react as readily with CO2.A fine cylindrical chemical sensor tip is developed with optical fiber in the core, surrounded by a transparent cylinder of photopolymer Norland Optical Adhesive 61 (NOA 61), and covered by a polymer hydrogel mixed with sensing molecules. The overall diameter is as small as 1.5 mm. pH response is demonstrated using two approaches of sensing materials (i) absorbing probe Phenol Red mixed with Rhodamine 6G fluorescent dye and (ii) 8-hydroxypyrene-1,3,6-trisulfonic acid fluorescent probe. Both the optical excitation and fluorescence signal collection are through the optical fibers. A time resolution of 10 s is achieved for pH variations. Good linearity is observed in the physiological range from pH 7.0 to pH 8.6 with reversible and reproducible outcomes. For in vitro urea measurement, the sensor tip can distinguish 1, 3, and 5 mM urea solution, which is a crucial range in saliva urea concentration. The miniaturized tip with such simple cylindrical symmetry is designed to detect vital signs during minimally invasive surgeries and can be potentially accompanied with endoscopes to enter human bodies.